Clean Engine Oil from Carpet

Removal Procedure Relatively Simple

whatever type of carpet you have, motor oil soaks into the fibers and if not treated properly and promptly can become permanent.

What you will need:

  • Cleaning solution:
    • Synthetic Fibers: Rubbing (Isoprophl) alcohol
    • Oriental Rugs: 5-6 drops of mild grease-cutting liquid dish soap mixed with 1 quart of water.
    • Wool Fiber: Aerosol brake parts cleaner, then dry cleaning fluid
  • Absorbent white paper towels (colored towels should not be used)
  • Clean, white, washcloth (colored washcloth, or one with designs, should not be used)
  • Plastic spoon
  • Weight (heavy books, dish, etc.)

Steps to Remove the Stain:

  1. If oil is puddled, use the plastic spoon to scoop up excess oil and dispose of spoon promptly. If the oil has dried, it may be helpful to use a small hand-vac to pick up residue. Avoid using a full-sized vacuum as you may inadvertently spread the stain.
  2. With a sheet or two of paper towel folded into a square, blot at the oil stain using a lifting motion, working from the outside, in. NEVER rub the stain or you may make it worse.
  3. Use paper towels to blot the oil. Use a lifting motion and blot until no more oil comes off on the paper towel.
  4. Apply a small amount of cleaning solution to washcloth.
  5. Test a small, inconspicuous area of the carpet to make sure it can withstand the cleaning solution without staining or fading.
  6. Blot the stain with the washcloth, using a lifting motion, working from the outside, in. Again, do not rub as this may spread the stain.
  7. Repeat the washcloth blotting (rewetting with cleaning solution if necessary) until the stain is gone, or the washcloth no longer picks up the residue.
  8. If stain remains, apply a small amount of cleaning solution directly to the stain and let stand no longer than 5 minutes. Blot with dry, white paper towel as in step # 2 until the moisture is absorbed and the stain is gone.
  9. Cover stain with clean cloth or stack of paper towels and put heavy weight on top (heavy books, etc.)
  10. Leave set for several hours to absorb any remaining liquid.
  11. Remove weights and cloths and let area air dry.
  12. When spot has dried completely, vacuum thoroughly to restore carpet texture and pick up any remaining cleaning solution residue.
  13. If stain still remains after all the above steps, contact a professional carpet cleaner.

Source: howtocleanstuff

121015 Ceramic Tile Finishes

About Fantastic Floors, Inc. We are a successful company with more than 25 years of experience in the market, we have the infrastructure, high quality equipment, materials and supplies to achieve and exceed the expectations of our customers, allowing us to gain the confidence and loyalty for our services .

We have more than 500 residential, 300 properties and 25 commercial customers totally satisfied with our services.

Ceramic Tile Finishes.

Carpet Cleaning Vendor in Houston, Carpet Repair, Carpet Treatment, Companies for Carpet Repair, Companies for Carpet Treatment, Companies for Carpet Installation, Remove Water for Carpet, Carpet Sale and Installation, Installer of carpet, Fantastic floor Inc, Wood floor installers, Wood floor installation, Installer of wood floor, Hardwood floor remodeling, Carpet flooring, Carpet remodeling, Ceramic tile Installers, Ceramic tile installation, Installer of ceramic tile, Ceramic tile remodeling, Ceramic tile refinishing, Ceramic tile finishes, Porcelain tile Installers, Porcelain tile installation, Installer of porcelain tile, Porcelain tile flooring, Porcelain tile remodeling, Porcelain tile refinishing, Porcelain tile finishes, Laminate tile, Laminate tile installation, Installer of laminate tile, Laminate tile flooring, Laminate tile remodeling, Laminate tile finishes, Vinyl tile installers, Vinyl tile installation, Installer of vinyl tile, Vinyl tile flooring, Vinyl tile remodeling, Fantastic floor. Inc.

Add comment

Free Estimate

Remember we offer very good quality services.